ELECTRODES HARD FACING ELECTRODES HARD WELD - 600 (LH)

HARD FACING ELECTRODES - HARD WELD - 600 (LH)

CHARACTERISTICS :

A medium heavy coated, low hydrogen, air hardening type hardfacing electrode. It gives non-machinable hard deposits of 600 BHN. The low hydrogen coating enables its use on high carbon/sulphur steels without under bead cracking or porosity. It yields hard surface deposits, resistant to heavy-abrasion and moderate impact. When a heavy deposit is required, the initial and intermediate layers may be deposited with Premier-7016 using Hardweld 600 (LH) for final two or three layers.

APPLICATIONS :

Hot & cold punching dies, Oil expellers, Worms, Pan mixer blades, Dredger bucket lips, Drill bits, Caterpillar threads, Punches, Dies, Dipper teeth, Disintegrator Hammers, Sprockets, Cane & Bamboo cutting knives etc.

TYPICAL WELDMETAL COMPOSITION

CURRENT RANGE & PACKING DATA:

HARDNESS :

550-640 BHN approximately on 3 layer deposit.

HOME | ABOUT US | SEARCH | ENQUIRY FORM | CONTACT US